High Performance Synthetic Grease
Series 2000 Synthetic Racing Grease, NLGI #2, GC/LB
The ultimate protection for hard-driven, high performance vehicles. Dramatically reduces friction and wear for improved performance. Excels at both high and low-temperature performance. Outperforms other conventional and synthetic greases.
AMSOIL Series 2000 Racing Grease maximizes power throughput and fuel efficiency by minimizing friction. The extra power given by Series 2000 improves acceleration and top-end speed.
Applications
AMSOIL Series 2000 Synthetic Lithium Complex Racing Grease meets the highest performance standards of the National Lubricating Grease Institute, GC for wheel bearing applications and LB for chassis applications.
Load Capacity
AMSOIL Series 2000 Racing Grease is an extreme pressure multipurpose grease formulated for high-temperature/high-speed applications. Yet, it excels in the protection of low-speed bearings, a job usually reserved for heavy-duty products. Components get the load bearing capacity of a heavy-duty grease without sacrificing the high-temperature protection of a multipurpose
Antiwear Performance
AMSOIL Series 2000 Racing Grease passes the Ford Film Strength Endurance Test with a 16 point margin. Most nonsolid-fortified racing greases, synthetic or conventional, do not pass.
AMSOIL Series 2000 Racing Grease keeps greased components in like-new condition.
All-Temperature Protection
AMSOIL Series 2000 Racing Grease pairs a high Viscosity Index synthetic base oil with a top-quality lithium complex thickener, known for its extraordinary performance in temperature extremes. AMSOIL Series 2000 Racing Grease offers excellent low-temperature pumpability and high-temperature consistency for dependable all-temperature protection.
Oxidation Resistance and Inhibition
AMSOIL Series 2000 Racing Grease's excellent oxidation resistance and robust package of oxidation inhibitors prevent grease breakdown and component surface damage in the highly oxidizing conditions associated with high temperature operations.
Washout Resistance and Corrosion Inhibition
AMSOIL Series 2000 Racing Grease resists water wash out and inhibits rust and other forms of corrosion.
Synthetic GH Series Heavy-Duty EP Grease, NLGI #2, GC/LB
Extreme-pressure, Moly fortified. Provides outstanding protection for four wheel drive steering knuckles, spring shackles, heavy equipment pivot joints and other components operating in high-load, low-speed conditions. Offers excellent water washout resistance
.
PRODUCT DESCRIPTION
AMSOIL GH Series Heavy Duty EP grease is composed of synthetic base oils and lithium-complex thickeners that provides the film strength, shear resistance, and mechanical stability critical to high load protection. This combination excels in high and low operating temperature ranges by providing excellent oxidation stability, high temperature dropping points and good low temperature torque values and pumping capabilities. AMSOIL Heavy Duty EP Grease is compounded with oxidation and corrosion inhibitors, effective oil soluble EP additives and molybdenum disulfide (moly) solid EP additives for all around protection in severe conditions.
AMSOIL Heavy Duty EP Grease is formulated with a top performing lithium complex thickener system that provides excellent water resistance as identified by the ASTM D-1264 water washout test. AMSOIL Heavy Duty EP Grease adheres to metal and is shear stable during severe mechanical activity, maintaining consistency and providing superior lubrication protection.
PERFORMANCE FEATURES
- Moly Fortified for added EP protection
- Adhesive and Shear Stable - prevents squeeze out
- High dropping point (exceeds 500ºF)
- Excellent water-washout resistance
- Oxidation and corrosion inhibited
APPLICATION RECOMMENDATION
The correct consistency grade of AMSOIL Heavy Duty EP Grease is recommended for use in heavy and light duty applications found in manufacturing plants, automotive applications, agricultural equipment and construction equipment. These include, but are not limited to, roller bearings, plain bearings, gears, bushings, wheel bearings, chassis lubrication, universal joints, ball joints, tie-rod ends, steering knuckles, and heavily loaded pivot pins on mining and off road equipment such as power shovels, drag lines, wheel and back hoe loaders, excavators and bulldozers. AMSOIL Heavy Duty EP Greases are suitable for use up to 325º F. When operating at elevated temperatures, frequent regreasing may be required.
Synthetic Multipurpose EP Grease, NLGI #2
Reduces friction and wear in high-speed, high-temperature components such as automotive wheel bearings and electric motors. Keeps components running clean and trouble free for outstanding performance and long-life.
PRODUCT DESCRIPTION
AMSOIL GLC multipurpose, EP grease is qualified against the highest grease standards, NLGI GC (wheel bearing) and LB (chassis), and is designed for multiple use applications. This grease is composed of synthetic base oils and lithium complex thickeners that provide the film strength, shear resistance and mechanical stability required for good grease lubrication. This combination excels in high and low operating temperature ranges by providing excellent oxidation stability, high temperature dropping points, good low temperature torque values and good low temperature pumping capabilities. GLC Grease is compounded with an effective oil soluble extreme-pressure additive for heavy loads, plus oxidation and corrosion inhibitors that impart good oxidation stability and rust protection.
AMSOIL'S top performing lithium complex thickener system provides excellent adhesion properties and water resistance as identified by ASTM D-1264 water washout test. This resistance to water means a protective film of lubricant remains present to protect equipment against wear while the corrosion inhibitors prevent rust. AMSOIL GLC Grease adheres to metal in all types of environments and resists squeeze out during operation. These qualities ensure maximum lubricant protection during harsh operations.
AMSOIL GLC multipurpose greases is recommended for many different applications. Its diversity simplifies lubricant inventories and prevents greasing errors while providing problem-free operation. AMSOIL GLC Grease reduces repair and maintenance costs.
PERFORMANCE FEATURES
- High dropping point of 550°F
- Resists thermal and oxidation degradation (lasts longer than conventional grease)
- Excellent water-washout resistance
- Good low temperature pumpability and torque values
- Adhesive and shear stable to prevent squeeze out
APPLICATION RECOMMENDATION
AMSOIL GLC Greases grade #2 is recommended for use in manual or automatic lubricating systems. NLGI #2 (GLC) is the preferred choice for medium to high ambient temperatures, sleeve type bushings, high shock loading environments, wet environments. and is the primary choice for wheel bearings.
The correct consistency grade of AMSOIL GL multipurpose greases are recommended for use in heavy and light duty applications found in manufacturing plants, automotive applications, agricultural equipment and construction equipment. These include, but are not limited to, roller bearings, plain bearings, thrust bearings, gears, electric motors, presses, winches, bushings, wheel bearings. chassis lubrication, universal joints, ball joints, tie-rod ends, and steering knuckles. AMSOIL GL greases are suitable for use up to 350 F When operating at elevated temperatures, frequent regreasing may be required.
AMSOIL GL Lithium Complex Greases are compatible with many other types of greases. However, it is recommended that when changing greases, the equipment be cleaned of the old grease when possible or flushed with a liberal amount of the GL grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Grease compatibility questions should be referred to your AMSOIL representative or AMSOIL Inc.
APPLICATION MAINTENANCE
Maintaining a clean work environment is important when equipment greasing is performed. Wipe grease fitting clean prior to injecting grease to prevent contaminant ingestion. Maintain bearing housings one-third to one-half full of grease. Do not over-grease, as excessive heat buildup can result. Supplement standard grease maintenance by periodically cleaning and packing housings with fresh grease on an established maintenance schedule.
AMSOIL Heavy Duty EP Greases are compatible with many other types of grease. However, it is recommended that when changing greases, the equipment be cleaned of the old grease when possible or flushed with a liberal amount of AMSOIL Heavy Duty EP Grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Any grease compatibility questions should be referred to your AMSOIL representative or AMSOIL INC.
Other AMSOIL Synthetic Greases
(GLC) Synthetic Multi-Purpose Spray Grease
(GWR)Synthetic Water Resistant Grease
(ALS) Silicone Spray
|
