|
Formulated for Fuller CD-50 performance and ideal for use in Rockwell / Eaton / Fuller, Spicer, Fabco, Warner and other large truck manual transmissions.
AMSOIL Synthetic Powershift Transmission Fluids can also be used in powershift transmissions used in Caterpillar, Allison, Komatsu, Clark, Hurth, Borg Warner, Spicer, Twin Disc, Voith, ZF, Funk, and Brockhouse mobile equipment.
PRODUCT DESCRIPTION
AMSOIL Synthetic Powershift Transmission Fluids are specifically designed for heavy-duty powershift transmissions. Formulated for extended drain intervals, Powershift Transmission Fluids contain top-quality synthetic basestocks and a high level of top-quality additives selected specifically for powershift transmission performance. They offer unmatched transmission friction performance, smooth brake operation, reduced gear and bearing wear and increased equipment life.
Truck & Fleet PDF Brochure
Friction Characteristics
HEAVY DUTY
ENDURANCE AIR & OIL FILTERS
|
AMSOIL Synthetic Powershift Transmission Fluids are compatible with common metallic and nonmetallic friction materials. Their stable frictional characteristics reduce or eliminate excessive brake noise and vibration, clutch slippage, friction surface deposits and design material degradation. Powershift Transmission Fluids are formulated for fast, smooth clutch engagements and wet brake operations, excellent power transmission through clutches and synchronizers and superior hydraulic fluid performance for servo equipped units.
Wear Protection
AMSOIL Synthetic Powershift Transmission Fluids exceed the wear requirements of the Caterpillar TO-4 specification and are formulated without viscosity index improvers for superior shear stability. The superior shear stability of Powershift Transmission Fluids allow them to maintain grade throughout service life, providing long-term protection against equipment wear, even when equipment is frequently subjected to sustained periods of applied pressure or high horsepower and high torque.
High and Low Temperature Performance
In high temperatures, AMSOIL Synthetic Powershift Transmission Fluids effectively protect components from wear. Their superior oxidative and thermal stability inhibits the formation of varnish, deposits and sludge so equipment runs clean. Synthetic Powershift Transmission Fluids are excellent heat transfer fluids and may help hot-running equipment operate cooler and run in their optimal temperature range. In low temperatures, Synthetic Powershift Transmission Fluids flow readily for dependable startup and post-startup protection.
Copper Corrosion, Rust and Foam Inhibition
AMSOIL Synthetic Powershift Transmission Fluids protect equipment from copper corrosion and rust, even during equipment storage. Synthetic Powershift Transmission Fluids do not foam in service, protecting equipment from the metal-to-metal contact and wear that occurs with use of foam-filled fluids.
 Diesel Fuel Additive
Improves Fuel Economy
Up to 5%
Restores Horsepower to Like New
Cleans Entire Fuel System
Extends Injector Life
Protects Against Water Contamination 
|
Applications
- Semi truck manual transmission
- Wheel loader and crawler
- Back hoe loader
- Cranes
- Off-road fork truck
- Harbor handling equipment
- Railway equipment
- Mining equipment
- Road grader
Installation
AMSOIL Synthetic Powershift Transmission Fluids are fully compatible with other fluids used in powershift applications. To install AMSOIL Synthetic Powershift Transmission Fluids, drain the fluid in the system,, replace the filter (if so equipped) and install the appropriate AMSOIL Synthetic Powershift Transmission Fluid.
Service Life
AMSOIL Synthetic Powershift Transmission Fluids provide extended service life beyond conventional petroleum fluids if Synthetic Powershift Transmission Fluids are kept free of dirt and moisture. Oil analysis is recommended if extending service intervals beyond equipment manufacturer recommendations.
AMSOIL Synthetic Powershift Transmission Fluids may be used for 250,000 miles or five years (whichever comes first) in manual transmissions.
|
Typical Technical Properties
AMSOIL SAE 50 Synthetic Powershift Transmission Fluid (CTL)
|
|
SAE Viscosity Grade
|
50
|
|
ISO Viscosity Grade
|
150
|
|
Kinematic Viscosity @ 100° C, cSt (ASTM D-445)
|
18.3
|
|
Kinematic Viscosity @ 40° C, cSt (ASTM D-445)
|
159.0
|
|
Viscosity Index (ASTM D-2270)
|
128
|
|
Flash Point °C (°F) (ASTM D-92)
|
268 (514)
|
|
Fire Point°C (°F) (ASTM D-92)
|
292 (558)
|
|
Pour Point °C (°F) (ASTM D-97)
|
-36 (-33)
|
|
Four Ball Wear Test 40 kg. 75°C, 1200 rpm, 1 hour (ASTM D-4172 B)
|
0.35
|
|
Noack 250°C, 1 hour, percent weight loss (DIN 51581)
|
3.5
|
|
(Also available: SAE 10 and SAE 30 Powershift Transmission Fluid)
|
|
|
