|
PRODUCT DESCRIPTION
AMSOIL Synthetic Heavy Duty Diesel & Marine Motor Oil (AME) is a premium diesel engine oil providing excellent performance in all types of diesel engines where highly effective control of wear and deposits is vital. Built with heavy-duty dispersant/detergent additives, its 12 TBN chemistry neutralizes acids and controls soot thickening from EGR and blow-by to protect against corrosion, cylinder bore polishing (wear) and varnish/sludge deposits. AMSOIL AME resists heat and breakdown better than conventional marine oils to provide long lasting performance and protection for your boat.
AMSOIL AME retains its viscosity (avoids thickening) after long term high temperature service to provide excellent fuel economy and continued dependable protection.
AMSOIL, the leader in synthetic lubrication, produced the world's first API qualified synthetic motor oil in 1972. You can trust the extensive experience of AMSOIL, The First in Synthetics®, to do the best job protecting your boat engine.
 Diesel Fuel Additive
Improves Fuel Economy Up to 5%
Restores Horsepower
to Like New
Cleans entire fuel system
Extends injector life
Protects against water contamination
|
Extends Drain Intervals
AMSOIL AME can extend drain intervals far beyond those recommended for conventional petroleum oils. Its unique synthetic formulation and long drain additive system deliver the best possible marine engine protection, cleanliness and performance over extended drain intervals, reducing vehicle maintenance and waste oil disposal costs.
Advanced Soot and Wear Control Formula
AMSOIL Synthetic Heavy Duty Diesel & Marine Motor Oil is heavily fortified with detergent/dispersant additives and is naturally resistant to soot. It keeps soot particles suspended independently, preventing them from attaching together to form larger, wear-causing particles. Viscosity increase is minimized and soot related wear is controlled.
Maximizes Fuel Economy,
Reduces Oil Consumption and Emissions
AMSOIL AME has lower high temperature volatility (evaporation) than conventional petroleum oils. Because less oil is vaporized, oil consumption and emissions are reduced. Lower volatility helps AMSOIL AME retain its viscosity after high temperature service for excellent fuel economy and continued dependable protection for your boat engine.
High Performance Marine Gear Oil
 Excellent Gear and Bearing Protection even when contaminated with 10% water
Reduced Friction and Wear
Excellent Rust and Corrosion Protection
Long Seal Life
Superior Foam Prevention
|
Excellent Cold Flow Properties
AMSOIL AME remains fluid down to -51°F. It eases cold weather starting and provides vital startup lubrication to prevent engine wear. AME outperforms conventional 15W-40 petroleum oils and greatly minimizes the impact of cold weather operation.
APPLICATIONS
AMSOIL Synthetic Heavy Duty Diesel & Marine Motor Oil is engineered for use in a wide variety of light and heavy duty applications, including over-the-road trucks, off road construction, marine engines, farm equipment, mining, industrial (pumps & generators) and personal automotive or commercial transportation. It is excellent for use with low or high sulfur diesel fuels in standard, turbocharged or supercharged engines, including modern low emission diesels such as those equipped with EGR systems.
AMSOIL Synthetic Heavy Duty Diesel & Marine Motor Oil is recommended for use in diesel engines and other applications requiring any of the listed worldwide specifications and gasoline engines requiring API SL, SJ, SH or ACEA, A3.
-
|
Marine Dual Remote Filtration System
Dramatically Extends Engine Life
|
API CI4+, CF, CF2, SL
- ACEA A3 / B3, E2, E3, E5
- Global DHD1
- JASO DH-1
- Mack EON Premium Plus '03
- DDC Power Guard 93K214
- Caterpillar ECF1
- Cummins CES 20071, 20072, 20076, 20077, 20078
- Volvo VDS2, VDS3
- MB 228.1, 228.3, 229.1
- MAN 271 / 3275
- MTU Type 2
- MIL-PRF-2104G
- Allison C4
MIXING AMSOIL
AMSOIL AME is compatible with conventional and synthetic motor oils. Mixing AMSOIL motor oils with other oils, however, will shorten the oil life expectancy and reduce the performance benefits. AMSOIL does not support extended drain intervals where oils have been mixed.
SERVICE LIFE
AMSOIL Synthetic Heavy Duty Diesel & Marine Motor Oil is recommended for extended drain intervals in unmodified(1), mechanically sound(2) vehicles or equipment as follows:
Commercial or Fleet Vehicles, Long-Haul Trucks, Marine Craft, RV, Off-Road Equipment
Non-EGR equipped diesels -- extend drain intervals up to two times (2X) the OEM* recommended drain interval or one year, whichever comes first, or longer based on oil analysis.
EGR equipped or low emission diesels -- extend drain intervals based on oil analysis or use the OEM* recommended interval.
Replace Donaldson Endurance™ or AMSOIL Ea™ full flow oil filters at the time of oil change up to two times (2X) longer than the OEM* standard interval, not to exceed 60,000 miles in long-haul trucks.
Normal Service -- Up to 25,000 miles or one year, whichever comes first, or longer based on oil analysis.
Severe Service -- Up to 15,000 miles or one year, whichever comes first, or longer based on oil analysis.
Replace AMSOIL Ea™ full flow oil filter or Donaldson Endurance™ ELF 7349 at the time of oil change up to 25,000 miles (other brands at standard OEM* intervals).
AMSOIL Ea™ and Donaldson Endurance™ full flow oil filters are designed for extended drain intervals. They stop smaller particles, have less restriction and last longer than regular filters. For best performance, use AMSOIL Ea or Donaldson Endurance oil filters. AMSOIL by-pass oil filters are specialized for the removal of small, wear-causing dirt particles, thereby extending engine life. AMSOIL encourages using an AMSOIL bypass filter system for maximum engine and oil life.
Oil Analyzers Inc., 715-395-0222, is a division of AMSOIL that provides cost effective, quality oil analysis services.
Below: Noack Volatility, % weight loss (g/100g)
|
TYPICAL TECHNICAL PROPERTIES
|
|
AMSOIL Synthetic SAE 15W-40 Heavy-Duty Diesel and Marine Motor Oil (AME)
|
|
Kinematic Viscosity @ 100°C, cSt (ASTM D-445)
|
14.4
|
|
Kinematic Viscosity @ 40°C, cSt (ASTM D-445)
|
90.8
|
|
Viscosity Index (ASTM D-2270)
|
164
|
|
CCS Viscosity @ -20°C, cP (ASTM D-2602)
|
3574
|
|
Pour Point °C (°F) (ASTM D-97)
|
-46 (-51)
|
|
Flash Point °C (°F) (ASTM D-92)
|
236 (457)
|
|
Four Ball Wear Test (ASTM D-4172B: 40 kg, 75°C, 1200 rpm, 1 hour), Scar, mm
|
0.35
|
|
Noack Volatility, % weight loss (g/100g) (ASTM D-5800)
|
6.8
|
|
High Temperature/High Shear Viscosity
(ASTM D-4683 @ 150°C, 1.0 X 106 s.-1, cP
|
4.3
|
|
Total Base Number
|
12.2
|
|
|
